P&S

P&S Power Modules
P&S provides various small-power isolated / non-isolated DC-DC / AC-DC products and rich power supply design support. P&S power modules have the advantages of small volume, light weight and high performance.
STM32 - 32-bit Microcontroller - STMicroelectronics
The STM32 family of 32‑bit Flash microcontrollers based on the ARM Cortex™‑M3 processor is designed to offer new degrees of freedom to MCU users.
AMIS-30521、30522
The AMIS−30521/30522 is a micro−stepping stepper motor driver for bipolar stepper motors. The chip is connected through I/O pins and a SPI interface with an external microcontroller.
LV8747
The LV8747T is a PWM constant-current control stepping motor driver and switching regulator controller IC.
ST8024L
The ST8024L is a complete low-cost analog interface for asynchronous Class A, B and C smartcards. It can be placed between the card and the microcontroller with few external components to perform all supply protection and control functions.
ISL28134
The ISL28134 is a single, chopper-stabilized Zero-Drift operational amplifier optimized for single and dual supply operation from 2.25V to 6.0V and ±1.125V and ±3.0V.
ISO7230C
The ISO7230 is triple-channel digital isolator each with multiple channel configurations and output enable functions. The device has logic input and output buffers separated by TI’s silicon dioxide isolation barrier.
ISL9110 and 9112
The ISL9110 and ISL9112 are highly-integrated Buck-Boost switching regulators that accept input voltages either above or below the regulated output voltage.
ISL9230
The ISL9230 is a fully integrated high input voltage single-cell Li-ion battery charger with power path management function. This charger performs the CC/CV charge function required by Li-ion batteries.